2600W 4 Channel Intelligent Battery Charger for AGRAS T16 Battery 17500mAh agricultural sprayer agri spraying

In The Box

This 2600W 4-Channel Intelligent Battery Charger is available in two versions. One version is compatible with T16/T20 batteries and one version is compatible with MG-12000P batteries. The version compatible with T16/T20 batteries has an adapter at the end of the charging cable, while the version compatible with MG-12000P batteries does not. The general descriptions in this manual apply to both versions. The illustrations in this manual may vary from the actual product.

To make sure the battery charger is working normally, please purchase an official DJI AC cable depending on the plug type of your region.

Introduction

Featuring the functionality of a battery charger and charging hub, the 2600W 4-Channel Intelligent Battery Charger can connect with up to four batteries. The max output power of the battery charger is 2600 watts and users can choose between two different charging modes: quick charge and slow charge. While charging, the battery charger monitors the batteries’ status and can automatically adjust the charging current if required. The battery charger continues to charge even if the ventilation holes are blocked.

Users can check the battery charging status LEDs and the warning indicator on the operation panel of the battery charger to confirm if there are any errors. The battery charger can be connected to a remote controller, and users can launch the DJI MG app or DJI Agras app to see more detailed information regarding any errors. Additionally, the battery charger has the following functions: overcurrent protection, overcharging protection, overheating protection, and status display.

Overview

Battery Charger

1. Operation Panel
2. Charging Cables Clamp
3. Air Vent
4. Charging Cables Storage *
5. Handle
6. Charging Cable **
7. Fan Cover
8. USB-C Port Cover
9. AC Power Port
10. GND Port

* The battery charger compatible with MG-12000P batteries does not have this storage space.
** The version compatible with T16/T20 batteries has an adapter at the end of the charging cable, while the
version compatible with MG-12000P batteries does not. The majority of the illustrations in this user guide
show the battery charger compatible with T16/T20 batteries.

Operational Panel

1. Charging Status LED × 4
Each LED indicates the charging status of the battery connected to a charging cable. The numbers (1-4) correspond to the position of the charging cable on the battery charger.

2. Warning Indicator
The warning indicator will be solid red if the battery charger detects any abnormalities. If this occurs, stop charging immediately. Only start to charge again once the indicator is no longer solid red.

3. Mode Button
Press to switch the charging mode. The default charging mode is quick charge.

4. Power Button
Press to turn the battery charger on and off.

Using the Battery Charger
Make sure that the GND cable is connected to the GND Port with the other end on the ground and follow the instructions below to use the battery charger. Up to 4 batteries can be connected to the 2600W 4-Channel Intelligent Battery Charger.

1. Connect the battery charger to a power outlet.

2. Connect the battery to the battery charger.
    A:For the battery charger compatible with T16/T20 batteries:
    a. When charging a T16/T20 battery, make sure the plug adapter is attached to the charging cable before attaching it to the battery you wish to charge.

*Before connecting the charging cable to the battery, make sure the plug adapter is securely attached to the charging cable. Note: it is normal for there to be approximately 0.8
mm of the yellow part of the cable visible even when it is securely attached.

*Make sure to place the charging battery on the same side that the charging cable is fixed to the battery charger.

    b. If users wish to charge MG-12000P batteries using the battery charger compatible with T16/T20 batteries, first detach the plug adapter from the charging cable, then connect the charging cable to the MG-12000P battery’s charging and balancing port.

*Although the battery charger compatible with T16/T20 batteries can be used to charge MG-12000P batteries by removing the plug adapters, it is not recommended to charge T16/T20 batteries and MG-12000P batteries at the same time. Doing so may negatively affect the charging performance, or even damage the battery charger permanently.

*Make sure to store plug adapters in a safe place for future use.

    B:For the battery charger compatible with MG-12000P batteries:

Connect the battery’s charging and balancing port to the charging cable.

*Make sure to place the charging battery on the same side that the charging cable is fixed
to the battery charger.

3. Make sure all cables are correctly connected and press the Power button on the operation panel of the charger. The four LEDs, the warning indicator, and the quick charge and slow charge indicators will simultaneously flash. After powering on, the only lights remaining will be the Charging Status LEDs representing the batteries currently connected. This indicates that the self-diagnosis is complete, and the device is working normally. For more information about how to check if there are any errors during self-diagnosis, refer to LEDs and Warning Indicator Description. Alternatively, connect the charger to a remote controller and launch the DJI MG app or DJI Agras app to see detailed information about the errors.

4. If no errors are detected during self-diagnosis, the battery charger will begin to charge the batteries. Press the Mode button to choose quick charge or slow charge mode (the default charging mode is quick charge). In quick charge mode, the battery charger will charge T16/T20 batteries in order of their power level, starting from highest to lowest. If MG-12000P batteries are being charged, the battery charger will first charge the two batteries with the highest power level, followed by the remaining two batteries.

In slow charge mode, the battery charger will first charge the batteries with the lower power levels. Once all batteries have the same power level, they will all be charged simultaneously.This applies to both T16/T20 and MG-12000P batteries.

      Youjujiapin has been one of the top distributors in radio control toys , Guangdong , China , Photography and intelligent device businesses . Till now we have deep strategic cooperation with DJI , Xiaomi/Fimi , Zhiyun , Nintendo , Insta 360 , Autel robotics , Sublue , The first-line intelligent hardware brands . The major products are camera drones , Agricultural spraying drones , Professional drones , Smart phone gimbal stabilizers , Dslr gimbals , Action cameras . Close to shenzhen airport with worldwide convenient transport .

      In recent years , We have expanded our products to more kinds of electronic promotional items/gifts . We also have rich experience in oem and odm . Our products are exported worldwide and have obtained customers' satisfaction for our product quality and services . Many customers have us be their steady supplier in china . Any inquiries or orders are warmly welcomed and appreciated . We sincerely hope to establish long-term business relationships with worldwide customers on the basis of our plentiful experience and good services .

1 : Timely response
      We will reply any of your inquiries within 24 hours . Even if on holidays .

2 : Strict quality control
      Our q&c team will inspect every shipment before delivery and provide official inspection report .

3 : After sales service
      Our customer service team will receive all the feedback from our customers and improve our service . We will give our responsible solution as soon as possible . Customers' satisfaction is our eternal pursuit .

Q : Why choose us ?
A : We have 4 years experience on drone business and one stop solutions of drone , Especially on security .

Q : What is the minimum order quantity(MOQ) ?
A : No quantity limited , Sample order or small order is acceptable , But the customers have to pay the sample cost and the courier cost .

Q : Could you offer wholesale price ?
A : Yes , Of course . If you order in large quantity , We can give you the wholesale price and more discount .

Q : How long is your delivery time ?
A : Generally 5-10 days if goods are in stock . If not in stock , We need possible 3 working days to prepare goods .

Q : What is your product quality ?
A : Our raw materials are all purchased from qualified suppliers . And we have very strict qc standard to assure our final products meet your requirements .

Q : Can you give me best shipping cost ?
A : Sure , We give our customer best shipping cost and fast shipping time . Usually we use DHL , UPS , FEDEX , TNT to keep the good quality . Or you can also appointed your own forwarder , We deliver goods to your forwarder , And help them to arrange shipment for you .

Q : Can you print my own logo on the products ?
A : Yes , Of course . Not only the logo , But also the packing design and other oem services are available . We will prepare artwork for visual confirmation , And next we will produce a real sample for your final confirmation . If sample confirmed ok , Then we will go to mass production .

Q : What’s the payment terms ?
A : We accept alibaba , L/C , D/A , D/P , T/T , Western union , Moneygram , Paypal , Alipay , Bank . Welcome to use the alibaba trade assurance .

Q : I'm shopping at your company at the first time, How can i trust you ?
A : We totally understand if you have some doubt about us at our first cooperation . You are welcome to visit our company or shop anytime you like .